Soil

Standards

AASHTO T180; AASHTO T193; AASHTO T99

ASTM D1557;ASTM D698; BS 1377:4; BS 1990

EN 13286-2; EN 13286-47

Product code

AR- 030     Automatic Soil Compactor

AR- 030/1  ASTM Rammer

AR- 030/2  EN Rammer

Standards

 ASTM D558; D698, D1557; AASHTO T99; T180; BS 1377-4

Product code

AR- 011 Standard Proctor Mould ASTM

AR- 012  Modified Proctor Mould ASTM

AR- 013 Standard Proctor Rammer ASTM

AR- 014 Modified Proctor Rammer ASTM

Moulds are used for determining the relationship between the moisture content and density of compacted soil. Made of plated steel, includes collar, mould body and base plate.Rammers are used to compact the soil sample in the Proctor Moulds. Made of plated steel. Guide sleeve with vent holes.

Standards

ASTM D4318; BS 1377:2; AASHTO T89

Product code

AR- 004  MANUAL TYPE

AR- 005  MOTORIZED TYPE

Standards

BS 1337:2; NF P94-052-1

Product code

AR- 002    Manuel Cone Penetrometer

AR- 003    Automatic Cone Penetrometer

AR- 003/1 Penetration Needles

AR- 003/2 AluminumMoisture Content

For determining the liquid limit of soils. This is specially useful to obtain reliable and accurate results of those soil which have low plasticity index. The percentage moisture contents determined when cone with half angle of 15-30 minutes under a total sliding weight of 148 gm penetrates 25mm gives the liquid limit.

Standards

ASTM D4318; AASHTO T90; BS 1377:2

UNI 10014; UNE 103-104; NF P94-051

Product code

AR- 007      Plastic Limit Test Set

AR- 007/1  Glass Plate 300 x 300 x 10 mm
AR- 007/2  Rod Caliper / diameter 3 mm

AR- 007/3  Mixing Porcelain Dish
AR- 007/4  Flexible Spatula
AR- 007/5 Aluminium Moisture Tins

Used to determine the lowest moisture content of a soil, by which a sample can be rolled into threads dia. 3 mm without breaking the same neither longitudinally or transversely.

Standards

ASTM D427; ASTM T92; UNI 10014;

UNE 103-108;NF P94-060; BS 1377:2

Product code

AR- 006   Shrinkage Limit Set

When the water content of a fine-grained soil is reduced below the plastic limit, shrinkage of the soil mass continues until the shrinkage limit is reached. This method of test covers the determination of the shrinkage limit, shrinkage ratio, volumetric shrinkage and linear shrinkage

AR- 006/1 Shrinkage dish.

AR- 006/2 Glass measuring cylinder.

AR- 006/3 Prong plate.

AR- 006/4 Two moisture content tins.

AR- 006/5 Spatula.

Standards

ASTM D1558

Product Code

AR- 023 Proktor Penetrometre

Standards

ASTM D2573-94

Product cod

POCKET PENETROMETERS

POCKET PENETROMETERS (Dial)

Pocket penetrometer is used to classify the cohesive soils based on the approximate consistencies measured in the field and to determine the uniaxial compressive strength.

Measuring Range: 0 to 4.5 kgf / sq.cm.

Dimensions: 19×153 mm.

Standards

ASTM D427; ASTM T92; UNI 10014;

UNE 103-108;NF P94-060; BS 1377:2

Product code

Used to quickly find shear strength of binding materials of soil in laboratory or field conditions.

Direct reading dial as Kgf/cm2.

Measuring range: 0-1 Kgf/cm2

Complete with stainless steel vane.

Weight: 300 gr.

Standards

TS 1900-1;ASTM D2937;BS 1377/9

Used to determine the bearing capacity of subgrades, or to measure soil compaction. Light and easy to handle in the field. A rapid means of determining the penetration resistance of soil in shallow exploration surveys. Includes: 30°, 1 sq. in. (6.45 sq cm) cone; 250 lb. (1.1kN) capacity proving ring; brake type dial indicator, holds final reading until manually released; 3/4” (19mm) dia. shaft, graduated at 6”, (152mm) intervals; 3/4” (19mm) dia. extension rod, graduated at 6” (152mm) intervals; cast aluminum T-handle.  Weight:6,8 kg

Standards

AASHTO T191; ASTM D1556

Product code

AR- 019         Sand Cone Density Set

AR- 019/1     Sand Cone Set 6.

AR- 019/2     Sand Cone Base Plate 6.

AR- 019/3     Plastic Sand Jar 5 lt.

For the on site determination of the degree of compaction.Complete set includes double cone, plastic sand jar 5lt capacity and metal tray.

Product code

AR-032    sand density pulley apparatus

Standards

BS 1377:2

Product code

Linear Shrinkage Mould

The test covers the determination of the shrinkage of soils and indicates the plastic properties of soils with low clay content.

Dimensions(mm)    140×12.5.

Weight(kg)   0.3.

Standards

ASTM D4944; AASHTO T217; BS 6576

Product code

AR-MCR   Speedy Moisture Tester Kit

Standards

ASTM D6938; D2950; C1040; AASHTO T310

Product code

Nordic Abrasion Machine

Standards

BS 1377; ASTM 46-47

Product code

AR- 024   Permeability Test Set

Product code

Digital Relistive

To determine groundwater

Device comes with:

1 Transmitter (Transmitter)

1 Receiver (receiver).

4  cables and probes.

Single channel.

Sensitivity: 0.01.

Battery and charger.

Standards

BS 1377:2 ; EN 1997-2

Product code

AR- 028   End-Over- End Shaker

Standards

ASTM D 2419; AASHTO T 176

Product code

AR-CMR/İ American import

AR-CMR   jeotest brand

Mud density provides a simple way to assess.

Metal-grade body.

Carrying case.

Weight: 5 kg

Standards

ISO 2431

Product code

AR-426 Marsh Funnel Viscosity Kit

Liquid materials are used in the viscosity determination.
Mouth Opening: 4.75mm.
Sieve Mesh Size: 2 mm.
Weight: 1 kg.

Standards

ASTM D422; AASHTO T88

Product code

AR- 031  Hydrometer Test Set

This equipment is used to determine the quantitative distribution of very fine particle size in soils such as clay and silt.

Dimensions: 300 x 630 x 530 mm.

Weight: 19 kg.

Set includes:

1 piece of Transparent Water Bath.

1 piece of 151 H Hydrometer.

1 piece of 152 H Hydrometer.

1 piece of 0 – 500C Glass Thermometer.

1 piece of 250 ml Beaker.

1 piece of Glass Baget.

1 piece of High Power Stirrer.

6 pieces of 1000 ml Capacity Hydrometer Measures.

Standards

AASHTO T193; ASTM D1883; BS 1377:4

EN 13286-47 ; NF P94-078 ; UNI CNR 10009

Product code

AR- 016 CBR Test Machine|  LCD

AR- 016 CBR Test Machine | Load cell digital readout

50 kN capacity.

1,27 mm/min loading frame.

50 kN capacity electronic load cell, 10 mm capacity 0,01 mm precision electronic deformation transducer, built with LCD monitor or Digital display.

comes with test software.

220 V 50 Hz.

Dimensions: 470x610x950 mm.

Weight:        88.5 Kg.

Power:         1100 W

Standards

Product code

Product code

AR- 016/AR CBR LOADING MACHINE HAND OPERATION 50 KN CAPACİTY

Load is applied through a meckanical jack and handwheel.

Upper beam can be adjusted in height.

The machine is supplied complete with:

Load Ring 50 kN capacity.

Penetration piston.

Dial gauge with dial gauge holder.

Dimensions: 430 x 380 x 1180 mm.

Weight: 80 Kg

Standards

ASTM D1883; AASHTO T193

Product code

AR- 016/1 CBR mould.

AR- 016/2 Deployment plate.

AR- 016/3 Deployment gauge 25 mm course and  0.01 mm accuracy.

AR- 016/4 Deployment tripod.

AR- 016/5 CBR  space disc.

AR- 016/6 Perfored weight.

AR- 016/7 Slotted weight.

AR- 016/8 Filter paper.

AR- 016/9 Deployment tank.

Standards

ASTM D1587; ASTM D1883; ASTM D698

BS 1377:4; BS 1924:2; BS 598:107

Product code

AR- 015 Universal Extruder

The extruder has been designed for laboratory and field use to extract samples from various moulds. The extruder head is for standard use with U4 sample tubes (internal 4” BSP thread).

It can also be used to remove 4” or 6” Compaction Moulds, CBR and Marshall Moulds with adaptor set which should be ordered separately. The extruder is 40kN capacity and easy to use.

Dimensions: 650x500x900 mm

Weight:        87 Kg.

Standards

ASTM D2435; ASTM D3877; ASTM D4546

BS 1377:5; AASHTO T216

Product code

AR- 026  Consolidation Test Set

Standards

ASTM D3038; BS 1377; AASHTO T236; BS-1377-7

Product code

AR- 028 Direct Digital Shear Apparatus

Standards

DIN 4094; BS 1377:9

Product code

AR- 001 Dynamic Penetrometer

Used to establish the thickness of different strata, when testing compaction works and to determine the relative density of fills and naturally deposited non-cohesive soils.

In general if the ground is not too compact, penetration tests can be carried of about 8 to 12 metres.

Standards

ASTM D1194; BS 1377

Product code

AR- 018 Plate Loading Test

This test is performed for the determination of the bearing capacity of a soil in-situ on road constructions, foundations, road subgrades, airport and highway pavements.100 kN, 300 kN capacities are available.

Standards

ASTM D 4253, 4254; EN 13286-5

Product code

Relative density

The equipment consists of:

Standards

 EN 13286-47; ASTM D1183; AASHTO T193; BS 1377:4, 1924:2

Product code

AR- 016/2  Swell Plate.

AR- 016/3  Dial Gauge 20mm x 0,01 mm.

AR- 016/4  Tripod.

Placed on top of the soil sample to enable monitoring of swelling. The swell test consists of perforated plate with adjustable stem (swell plate), dial gauge tripod and dial gauge.

Standards

BS-1377; ASTM D-2850

Product code

AR- 034  TRIAXIAL STRESS MEASUREMENT TEST (UU-CU-CD TESTS)

Standards

ASTM D4647

Product code

AR-1289