Thanks to the equipment in the hydrometer experiment set, the numerical distributions of particles with fine dimensions such as clay and style are determined. In the hydrometer test set used in the tests to determine the numerical distributions, one transparent water bath, one hydrometer, one glass thermometer measuring 0-500 degrees, 250 ml beaker, one glass rod, one high-powered stirrer and 6 pieces There is a hydrometer measure with a capacity of 1000 ml.

Within the scope of the experiments carried out using all these products, especially each product must be produced in accordance with world standards and it is determined whether the data obtained is in accordance with world standards.

Since the data obtained as a result of the experiments with the sets that do not give real results, cause serious problems in the areas where these structures are used, it is absolutely necessary to pay attention to whether the tests carried out in this process are in accordance with the standard. At this point, the universal standards that it is produced in accordance with the standards are known as ASTM D422 and AASHTO T88.

Hydrometer Test Set General Features

The unit in the hydrometer test set, which is used as a mechanical mixer tool in the experiments carried out on clay and silt ground, operates at 35 degrees as a hydrometer bath and ambient temperature and serves in this context.

It is possible to reach all the materials needed during the experiment in the hydrometer test set, and it is also possible to use it in all areas of use since it is designed in accordance with both field and field conditions. It is possible to take 8 graves with the hydrometer test set, which has a capacity of 50 lt.

With the hydrometer test set, which has a mixer rotation capacity of 100 W, the pallet rotation speed is on average 13.000 rpm.

It is possible to reach this temperature since this experimental set, which operates at an ambient temperature of 35 degrees, also has a heating feature. The hydrometer test set, which has rubber plug and sodium hexametaphosphate properties, weighs 1 kg, is used on fine-grained sand or soil structures and has special use to classify these products according to clay and silt properties.

Thanks to the mixing bowl inside, it is possible to complete the distribution in the best way, and the automatic operation of the mixer, which is also in the hydrometer experiment set, ensures that it has high-energy power, while at the same time reducing the labor force of the experimenter to a minimum.

All the data obtained as a result of the experiments carried out with this test set, which has ideal and high performance options for the dispersion of grain sizes, especially thanks to its automatic feature, are close to reality, and as a result of the experiments, these products to be used in starting the production of the samples are determined as suitable for use.