The CBR Tester, produced with the highest quality Argon Test assurance in accordance with all necessary standards such as AASHTO T193, ASTM D1883, BS 1377:4, EN 13286-47, NF P94-078, UNI CNR 10009, is a highly effective product. It is a device used to measure the strength required for small-grained sub-bases and base materials as well as for road construction.

This device, which has four analogue channels as well as a computer option and can be used very easily and effectively thanks to its digital unit, draws attention with its ability to perform the necessary tests in a short time and to display all the experimental graphics that emerge during this test process in real time. .

The CBR Tester, which also has the capacity of load control and displacement, takes an active role in its field of use as a very functional, practical and important device thanks to all these features. It is also brought to you by Argon Test at the most affordable prices.

CBR Tester Features

Thanks to its very large capacity, the CBR Tester enables the load bearing value of the penetration piston to be measured with the soil sample at the displacement speed in order to carry out the CBR bearing ratio test. While its up and down buttons are located on the front panel, the piston comes into contact with the sample thanks to these buttons. Other features for the CBR Tester, which facilitates the test to be performed with the digital data collection and control unit, and the subsequent evaluation and examination, are as follows;

CBR Tester Piston speed is seen as constant in the range of 0.5-5 mm minutes.
It has 800 x 480 pixel TFT LCD touch digital screen.
The digital unit, which enables the load values of 625, 1.25, 1.875, 2.5, and 3.75, 5, 7.5, 10 and 12.5 mm to be recorded instantly to the memory, ensures that all data can be recorded thanks to this feature.
It can permanently store 000 test results.
2.5 mm and 5 mm CBR values can be calculated automatically with this device.
CBR Tester has 4 main function keys.
It has a 32-bit ARM microprocessor CPU card.
Its capacity is 50 kN.
It has a fast loading feature of 1.27 mm per minute.
It has an electronic load cell with a capacity of 50 kN.
It has a capacity of 10 mm and a sensitivity of 0.01 mm.
It is sent to you together with the electronic deformation transducer and test program.
The dimensions of the device are 470x610x950 mm.
The weight of the device is 88.5 Kg.
CBR Tester power is 1100 W and 220 V 50 Hz.
What Does the CBR Tester Do?
Designed and produced with the assurance and quality of Argon Test, the CBR Tester performs in the most effective way in the field of use, presents the results of the tests performed in a completely flawless and consistent manner, and is used as an extremely important device thanks to its useful structure and quality materials.