Automatic Soil Compactor

The Automatic Soil Compactors is designed to provide a fully automatic uniform compaction of Standard / Modified and CBR specimens assuring conformity with the reference standard.

Compactor is equipped with programmable digital counter which allows machine to stop at the preset numbers of blows. The height and weight of the rammer is adjustable to suit test requirements. The drop weight is adjustable to 300 mm drop height and is also adjustable to 450 mm drop height. The rammer is circular faced with a 50 mm diameter and is adjustable to 2.5 kg. or 4.5 kg.

An automatic blow pattern ensures effective compaction for each layer of soil and the rammer travels across the mould. The table rotates the mould in equal steps and the number of blows per layer can be set at the beginning of the test by the digital counter. User defined blow number and in-out distribution is also available.

A standard proctor / CBR switch, emergency stop and start push buttons are located beside the blow counter.

220 V, 50-60 Hz, 1 ph

Drop Height:          300-305-450-457 mm(adjustable)

Rammer Weight:    2.5-4.5 Kg.

Dimensions: 640x340x1506 mm.

Weight:        135 Kg.

Power:         370 W.

The automatic soil compactor is both simple and practical to use, and at the same time, thanks to its digital counter capacity, it ensures that the operations are carried out much more precisely.

The device, which is adjusted with high sensitivity after adjusting its performance to standard impacts, also appears as very long-lasting products thanks to its special design and constant drop height.

Especially the devices used in construction, industry or laboratory areas must be produced in accordance with international standards, and the tests carried out thanks to these devices are concluded in accordance with the standards.

Automatic soil compactor is also produced in accordance with AASHTO T180, AASHTO T193, AASHTO T99, ASTM D1557;ASTM D698, BS 1377:4, BS 1990, EN 13286-2 and EN 13286-47 standards.

What are the Features of Automatic Soil Compactor?

Thanks to its digital screen, it is very easy to make adjustments before starting the process, making it very practical to use in summer. This product, which is produced in accordance with international standards, also appears as test devices with a special design that will ensure that the samples prepared for testing in the laboratory fall with a uniform distribution.

The hammer drop, compression process and drop height capacity of the device are determined according to the standards and it is very simple to carry out the operations through these settings.

In addition, it is possible to make adjustments on the digital screen by choosing the layer on the device, and it is also possible to set the device’s fixed radius trajectory operating projection before the test process.

This device is clamped over 2 orbits with radius and the drop height can be adjusted between 300 mm, 305 mm, 450 mm and 457 mm millimeters.

The tractor’s salary of the product is between 2.5-4.5 Kg, and the general dimensions and weight of the device are 640x340x1506 mm, 135 kg. The total power of the device is 370 W.

Automatic Soil Compactor Rammer Capacity

This device, which has a total compression capacity of 100 mm, is automatic, making it possible to adjust all operations through programs. At this point, compression of samples with a diameter of 150 mm also provides equality.

Thanks to the rammers produced in accordance with ASTM and EN standards, which are among the international standards, devices are also sold and produced in accordance with these standards. Thanks to the digital counter on it, the operation can be performed according to the special internal and external distribution adjustment capacity, and the process can be carried out by itself thanks to the professional support provided by the fall counter.

The round shape of the automatic rammer is not impressive on the drop height, and the average weight capacity of the rammer differs or shows between 2.5 and 4.5 kg. At the same time, there is equal compression, standard proctor and CBR selection switch in the device, and operations are carried out much easier thanks to these equipments.