The Ring Penetrometer is used to determine the bearing capacity of soils or measures soil compaction. Lightweight and easy to use in the field. It is a quick tool for determining the penetration resistance of the soil in surface exploration investigations. 30˚, 1in2 (6.45 cm2) cone; Load ring with 250 lb.(1.1kN) capacity; brake-type dial indicator holds the manually released last reading unit; ¾-inch (19mm) diameter shaft graduated at 6-inch (152mm) increments; Extension bar with ¾ inch(19mm) diameter, graduated in 6 inch(152mm) increments; It consists of a cast aluminum T-arm.
Weight :6.8 kg.
The ring penetrometer, which is specially designed to measure soil compaction and bearing capacity, is a minimal device designed to be used in field conditions. Especially since some tests must be done on the field, devices that can be transported to the field appear as functional products at this point.
Since changes may occur during the transportation or transfer of some samples, test equipment suitable for land use should be preferred when it is necessary to test it as it was obtained at the first time.
The ring penetrometer, which is a device with a light and thin design and a manually released final reading unit, is used with a graduated extension bar and provides a significant advantage to the users as it works easily and with brake dial indicator capacity.
Thanks to this device, which is among the surface reconnaissance tools, the penetration resistance of the soil in the area is determined, and at this point, it is possible to reach professional and clearest results.
What are the Ring Penetrometer Features?
When the ring penetrometer features are examined, it has the feature of being a very ergonomic product as it is a product that can be used for all floor types. At the same time, it has a very light and thin design, making it possible to measure quickly, and it makes it possible to measure instantly as it is easy to transport to the desired land.
This device, which has the feature of manual use, shows integrity with the load ring, the last reading unit and the needle indicator, and ensures that the experiments performed are both safe and have clear results.
While it is generally used during surface determination processes, it has an optional limit indicator, making it possible for even inexperienced operators to use it.
The ring penetrometer device, which is produced in accordance with TS 1900-1, ASTM D2937 and BS 1377/9 standards, has a diameter of 19 mm and has a unit reading feature. At the same time, it has a T-arm made of aluminum material and is used during the experiment with a graduated extension bar with 6-inch intervals.
However, it is very advantageous for the processes to have not only the test stick but also a colony of 6,42 cm2.
This device, which is a very light product due to its general material structure being cast aluminum, has an average weight of 7 kg. Since it is possible to make a rating thanks to the indicator with the brake pointer on it, it is possible to customize it for the operations performed.
How to Manually Use Ring Penetrometer?
How to use ring penetrometer manually? In the scope of his question, he mentioned above that these products can be used especially in the field, and they can be used comfortably in any terrain conditions thanks to their special designs, and at the same time, they appear as functional products due to their long durability with their wide and light lines.
Thanks to the T handle on it, it not only has a practical holding capacity, but also provides easy use and makes it possible to use it manually.