Coring angle: 360°
All working and moving parts are cadmium plated for rust protection.
The drilling excursion is 550 mm and the machine can drill cores up to 200 mm dia.
The slinding group is rectified so as to assure a very soft and accurete drilling movement.
Power: 220-240 V 1ph 50 Hz 2400 W.
|Karot Bıçağı||Inside dia mm|
The core drilling machine is used for the tests that the core products must pass before and after use, especially among the materials most used in the construction and road sector. Particularly serious problems arise because the samples are sometimes large or not the right size for the instrument.
However, the core drilling machine provides convenience in case the core materials do not fit or are not suitable for the limited dimensions of the test vehicles and ensures that the samples are brought to the desired size.
Coring Machine Function
Coring machine is used especially for taking all kinds of concrete, natural stone or asphalt samples in terms of its function, and road pavement materials also have an important place among these products.
This product, which has many different areas of use, is also frequently preferred in the general addition, construction and road sector as it gives successful results. The products are produced in different models with different collection diameters and intervals and they are specially designed for all kinds of usage areas.
Coring Machine Features
Among the features of the core drilling machine, it is possible to take it to many different areas of use, and thanks to its portable feature, it does not cause any problems for people during transportation. The engine it has works with the help of gasoline and has a power of 1 HP.
The product has a top plate that is placed on the top of the product during the cutting process. In particular, the columns that connect the tables are both safe and functional because they have 2 different structures.
It is possible to make various adjustments for the cutting pressure, and thanks to these adjustments, it is possible to increase and decrease the pressure.
This product, which has 360-degree mobility, has a stainless feature as its exterior is covered with cadmium material. For this reason, it is a product that can be used for a long time and does not cause any problems during use.
The blade models of this device, which has 6 different core blade models, are called various according to their diameter lengths.
In general, it is possible to take samples with a diameter of 200 mm up to a depth of 550 mm. Among the core blade models, the model with the smallest diameter is JG-054, with a diameter of 50 mm. Diameter lengths of other models are JG-055- 75 mm, JG-056- 100 mm, JG-057- 125 mm, JG-058- 150 mm and JG-059- 200 mm.
To continue with the general device features, it is possible to use it continuously thanks to the ball in the video system it has. In this way, after the cutting process is over, the blades are pulled back quickly, thus saving time.
Another remarkable feature of the device is that it has a water spray system that facilitates cutting. The bottom table of the product is rigid and at the same time, it is very easy to use with its special arms to be taken on the scale.