120 Ton capacity
Fully Automatic computerized system.
Digital control unit with graphical lcd.
Test can be made manually or automatically .
Motor speed control using variable frequency drive
400 bar pressure transducer
Distance between platnes adjustable from 50 to 320 mm.
Compression platens dimensions 500x310x50 mm.
Platens hardness 55 HRC.
Upper platen has a spherical seat for homogeneous loading.
Piston ram travel 50 mm.
Pressure relief valve.
Comes with test software.
220-240 V 1 ph 50 Hz.

Designed and manufactured to test the strength of samples such as pumice, concrete blocks and bricks consistently and reliably, the Brick Tester is used to determine the behavior of materials under breaking loads by means of pressure testing. The deformation of the samples compressed with the press at various loads is examined and recorded.

This device, which is very easy to use because it is fully automatic, performs the entire test process automatically after the system is set up and started, automatically stops after the test sample is broken and completes the process. You can contact our company for detailed information and prices for the Brick Tester, which is produced with the assurance and quality of Argon Test.

While the tests made with the Brick Tester can be done from the digital panel on the hydraulic power unit, these tests can also be carried out through the computer thanks to the computer software it has. This device has many parts in it and all the parts it has are as follows;

Press Body
Digital Data Acquisition and Control System
Automatic Hydraulic Power Unit
Distance Pieces
Bottom Plate
Moving Head Top Plate
Overload Prevention Maximum Pressure Valves
Emergency Stop Button
Limit Switch

Brick Tester Features

Among the features of the Brick Tester, which is one of the highest quality test devices produced with the assurance of Argon Test, are the following;

Brick Tester capacity is 120 tons.
It has a fully automatic computer controlled and digital display control unit.
It can be operated both automatically and manually.
There is a motor speed control unit for speed control.
400 Bar Pressure Transducer load meter is available.
The maximum clearance between two plates is 336 mm.
It has a test distance between 50 mm and 320 mm.
It has a diameter of 310×520 mm pressure plates.
The hardness of the plates is 55 HRC.

It is equipped with a movable head.
The maximum piston stroke is 50 mm.
The hydraulic system is a device with a safety valve.
The power of the device is 220-240 V 1 ph 50 Hz.

Brick Tester Software

Thanks to the Brick Tester software, sample, laboratory and company information can be entered into the program, load-time graph, sample reports and test reports can be retrieved and stored thanks to this software. The software reflects the test data, load-time graphics and test results to the LCD screen in real time, allowing the data and results to be viewed from there.

The special software of this device enables to give “Start” and “Stop” commands on the computer and to control these commands, as well as the management and data collection of compression, tensile and split tensile tests throughout the test.

Thanks to its advanced functions, it makes it very easy to find all the recorded data. All details about the test, down to the smallest detail, can be entered into the system with this software and also printed with a printer. The software can be used with two different language options, English and Turkish.