The Masonry Saw has been developed to cut and prepare test samples of concrete, rock specimens and cores. It is available in three different models.
Special clamp assembly allows specimens to be held during cutting operation. The machine is supplied complete with circulation water pump.
|Motor (Hp)||3-220-380 V||5.5-380 V||5.5-380 V|
|Motor for cutting with water(Hp)||0.50-220 V||0.50-220 V||0.50-220 V|
Table type cutting machine is an important test device used during building construction. It is the most important rule to test different natural and unnatural materials that are used especially during construction.
However, since these products may not always be easy to test due to their size, it is very important to bring them to ideal dimensions. At this point, the table type cutting machine appears as a functional product that is used to bring the sample products to be used and tested to the ideal dimensions.
The cutting machine, which has a functional and practical use due to its table type, has been specially designed for use at every point.
Table Type Cutting Machine Function
Table type cutting machine designed in accordance with EN 1367-3 standards is used to cut and sample materials such as natural stone, hardened concrete or rock.
It has an important use especially during the ideal size of the samples so that they can be fully supplied to the devices. These products, which are produced in 3 different models, are especially used to make the head sections of the sample products flatter.
This device, which is practical and easy to use, has the function of making any size for core samples with different properties. This product, which has different types, also has a very wide area in terms of usage area. It is very easy to use thanks to the bearings called bobbins on the table type cutting machine, which can be used in almost all areas where sample cutting is applied.
Table Type Cutting Machine Features
Table type cutting machine features differ according to 3 different models and it is basically a product that is used to bring the samples to the desired size. These products, which have the model names Small, Junior and Major, have different features from each other in terms of blade diameter, maximum cutting length, motor power and weight and size.
First, the model with the smallest diameter is considered small. The diameter of this model is 350mm and its weight is 75 kg. This model can be cut up to a maximum of 110 mm and the cutting length is 700 mm. This product is produced in 1100x600x750 dimensions.
The second model junior has a blade diameter of 450 mm and is produced as 80 kg in weight. The maximum cutting length of this device is 175 mm and the cutting length is 600 mm.
The largest model, the major, has a length of 600 mm in terms of blade diameter, with a maximum cutting length of 250 mm and a cutting length of 650 mm. This product, which weighs 90 kg, has the dimensions of 1300x700x950 in terms of dimensions.