Designed to undertake a more precise and sensitive test procedure than the simple slump test.
The apparatus consists of two conical hoppers mounted on a cylinder.
Galvinezed double steel sheet flow table with top plate
The compacting factor is the ratio between the weight of the partially compacted concrete and the weight of the fully compacted concrete.
Supplied complete with tamping rod dia. mm 16×600 long.
Dimensions: 500x400x1510 mm.
Weight: 55 Kg
The compression factor device, which has a similar use with the simple slump test, is used for tests carried out for different purposes in fresh concrete. It differs from the simple slump test in particular by applying a more sensitive and precise test procedure.
Thanks to this device, which is produced in accordance with TS EN 12390-3 and BS 1881:103 standards within the scope of international standards, the quality of the concrete is easily determined and compaction is applied for this determination.
The compression process, on the other hand, is applied in a very practical and easy way with the compression factor device, and the evaluation of the results obtained is quite simple. The data obtained is obtained in the closest way to the truth, and the results obtained thanks to this device are close to the reality.
Compression Factor Device Function
The compression factor device, which is used on wet concrete that has not yet dried, is used for testing concretes with high, medium or low workability in terms of basic properties.
Basically, the data obtained as a result of this test, which is performed with the compression factor device, which reveals more sensitive and sensitive results than the collapse test, is much higher.
In the scope of the compression factor device, which was designed in accordance with the test procedure, the feature that stands out in particular is the compression factor. In other words, the results of the fully compacted wet concrete are evaluated.
Compression Factor Device Features
In terms of the features of the compression factor device, it basically consists of 2 conical feeding hoppers placed on the set cylinder.
The feeding unit has especially originating flashes with a quick-release mechanism, and at the same time, the whole system is built on a solid steel stand, making it very robust and long-lasting. This device, which has 500x400x1510 mm dimensions, also has a weight of 55 Kg.
A field feeding houris do not come into contact with each other in any case, so it is possible to get the data obtained as close to reality as possible.
At the same time, this feature is an important feature to ensure that non-dry concrete, that is, wet concrete, falls without any intervention.
Thanks to the compression process performed within a certain time period, the resulting data is reliable.
The fact that the data obtained during the durability test of concrete products to be used in the construction sector is reliable and realistic is very important for the durability of the structures later on, and it is also very important for the production stage of this product to be produced.
The compression factor device, which provides successful mixing and concludes the test properly, reveals the targeted data by applying compaction to wet concrete samples.
At the same time, there is a compaction bar with a diameter of 16 mm and a length of 600 mm, which provides compaction of wet concrete.
Reviews
There are no reviews yet.