It is suitable for concrete structures and buildings, and has the resistance strength of the finished product.
The impact energy of the spring is 0,225 mkg. (2,207 Joules).
Strength range: 10 to 70 N/mm2 (100 to 700 kgf/cm2).
The calibration curve is expressed in N/mm 2 (Mpa) value.
Emery is used for abrasives.
Spare test spring.
Dimensions: 330 x 170 x 85 mm.
Net weight: 1.4 kg.
The strength of the completed structures is extremely important. Concrete Test Hammer N Type device is a very useful product used to examine the quality of concrete used in buildings together with the pressure process and to measure the strength of concretes and see them as numerical data. The resistance of hardened concrete against pressure can be examined with this device and it can be learned very quickly and easily.
Also known as the Schmidt hammer, this device provides the most reliable and consistent results for concrete thickness up to 100 mm as the N type. With this device, consistent and reliable results can be obtained instantly, while determining the strength of concrete together with the elastic rebound method.
The Concrete Test Hammer N Type, which stands out especially because it can measure the strength properties of hardened concrete with a non-destructive method, has an extremely easy and simple use. Thanks to this hammer device, the general quality and weak points of the concrete can be easily detected.
There is a calibration anvil for the calibration of this hammer and the hammer is calibrated with this anvil, which has a striking area hardness of 52 HRC. The object to be tested with this device should have a minimum thickness of 100 mm, that is, approximately 3.9 inches.
Thanks to Argon Test, you can have the most reliable devices at the most affordable prices, and you can contact our company for detailed information and prices about our Concrete Test Hammer N Type device.
Concrete Test Hammer N Type Features
This Concrete Test Hammer N Type device is offered to you at the most affordable prices with Argon Test quality and assurance. Among the features of the Concrete Test Hammer N Type, which can be carried very easily with its protable structure and its bag, and can be used easily because it is not too big and heavy;
The measuring range of this device is 10-70 N/mm2 compression strength.
It has an aluminum body.
The impact energy of this device is 2.207 Joules and the impact value can be instantly read from the hammer.
Comes with spare measuring spring, calibration curve, watchmaker and Phillips screwdriver, etching stone and carrying case.
It measures 330x170x85 mm.
It has a net weight of 1.4 Kg.
It is extremely useful.
It is impact resistant.
Concrete Test Hammer N Type Function
The Concrete Test Hammer Type N function is to determine the compressive strength of concretes in an analogous way. The concrete test hammer N type device performs measurements with the Schmidt principle. This measurement method provides kinetic impact energy to the concrete and a rebound to occur.
With the rebound that occurs, the compressive strength of the concrete is determined by this device and the compressive strength determined on the device can be seen numerically instantly. You can safely choose Argon Test, which has the most affordable prices, to have this device, which is very fast and easy to use for determining concrete hardness.