This mixer is designed for mixing mortar and grout, mainly in compliance with standard requirements. The mixing head rotates at 62 and 125 r.p.m. and beaters 140 and 285 r.p.m
The user can easily select the speed using a switch mounted on the machine. The mixer comes with a 5 liter capacity bowl and whisk.
220 V, 50-60 Hz
Dimensions: 300x555x610 mm
Weight: 54 Kg.
Power: 250 W.
It is possible to obtain specially prepared cement with the manual cement mixer used during the completion of the appropriate mixing man to obtain the cement. It is possible to create 5 lt cement within the scope of the tests carried out before the process of creating more mortar.
In particular, it is ensured that the mortar is mixed and ready for the tests through the system, and the devices with the greatest function in order to form the test in the most appropriate way are considered as manual cement mixers. Thus, all necessary inspection facilities can be completed completely over the prepared mortar, and the usability of the mortar is thus determined.
It is very important that the cement mixture, which will be sent to the test later, is homogeneous, and non-homogeneous cement samples provide accurate results. Homogenized mortars must be produced so that the data can be obtained correctly and then these products can be used in buildings.
Manual Cement Mixer Technical Specifications
It is not easy to move this product, which has a weight of 54 kg, which is the most important among the manual cement mixer technical features, from one point to another. However, thanks to this amount, it is possible to produce quite a lot of products, and it is possible to provide the mixture quite well with its 250 W power in terms of power.
In order to avoid any problems in the mixing man of the mortar, these products must be produced in accordance with global standards and the mixing man must be finalized with this specially designed device.
Thanks to the system in which this device with the dimensions of 300x555x610 mm is located, it is entirely up to the person who will perform the process to determine the speed level, and it is possible to obtain the mixture at the desired speed level. Thanks to the switch on the mixer, the recirculation phase is determined quickly, so if low speed is selected, it performs 62 rotations. However, when the mixture is adjusted at high speed, the mixer rotates 125 times.
Thanks to the sand in it, the mixture is transferred to the system more easily and the mortar is professionally mixed with the performance of large concrete mixers.
Thus, after the external mixing process is completed, the strength or density tests of the mortar are made more easily, and the most important factor affecting the durability in the regularly advancing stages is the amount of circulation performed during the mixer.
Thanks to the standards of these devices, both the usage stages are practical and they have a long-lasting use. If the test components are maintained at regular intervals, it is possible to use them for a very long time and it is possible to make the functionality of the devices easier.
Cement mortar is produced with the mixing pallet inside the device and the mixing bowl with a 5 lt capacity. The mixing pallet speed was determined as 140 and 285 and it is aimed to mix the cement paste homogeneously.