Used to determine the particle size of Portland cement, lime and similar powders in terms of specific surface area. It consists of a stainless steel battery, perforated disc and plunger.
The U-tube glass manometer is mounted on a steel frame. The set comes with a rubber aspirator and filter paper.
Dimensions: 170x220x470 mm
Weight: 8 kg.
The Blaine Device is basically a test device used to determine the grain fineness of the materials that should form the cement mixture. Thanks to this test device, it is very easy to measure the particle size, and besides cement, products in powder form and lime materials can also be tested among the materials used during the measurement.
Particularly, the particle thickness or fineness is very important for the determination of the mixture to be formed later at this point, and at the same time, the performance and durability of this mixture at the points where it will be used are determined.
Thanks to this test device, the accuracy rate of the results obtained from the experiments is 100%, and it is possible to reach clear results from the measurements without any deviation.
These devices, which provide quality and guaranteed measurement, give accurate results, especially when produced according to appropriate standards. It is very important that the result obtained here is correct. Otherwise, not getting correct results will cause negative results when considering that the samples that pass the test will be used in the buildings, and cause unstable structures to occur.
This device, which is produced in accordance with the EN 196-6 standard, also includes a manometer tube, cell, filter paper and manometer liquid. At the same time, the device has a weight of 8 kg and measures 170 X 220 X 470 mm in terms of dimensions.
Blaine Device Technical Specifications
Blaine device technical features are very important in terms of features. Because the cement mixture to be revealed as a result of the tests made with this device provides the most efficient result when it is in the right form.
While testing with the device, the blain technique is used and thanks to this technique, the size of the grains is examined and then it provides information on how much air permeability the mortar will be.
The cement mortar used in the buildings must go through comprehensive and all tests, and if these tests are not passed, its durability or whether it is produced in accordance with the standards is determined.
The Blaine device is not a single device, it contains some materials. In these materials, there is especially a component and this component is used during the sample volume measurement and calculation step.
The component gives information about whether all the steps of the measurement are in compliance with the general standards, and in cases where it is not produced according to the appropriate standards, this situation is included in the test result.
In addition, there is a test stand and this stand provides durable protection and storage during the process. In other words, there is a rubber ball to take the substance to be measured, and the process is continued thanks to these materials.
Plastic funnel and filter paper also have an important role in determining whether they are made in accordance with the textile standards and must be included in the set. It is very important to purchase devices that have been tested and manufactured according to globally approved standards.