Le Chatelier Water Bath

Measure the time of the cement sample used and the outlet of the expansion device. The bathroom is made of stainless steel, non-static powder paint, and digital display. Racks with a capacity of 12 modes are available. The ambient temperature during operation is between 95°C.

220 volts, 50-60 Hz, 1 phase

Weight: 20 kg.

Le Chatelier Water Bath device is a product used to determine the expansion and setting time of cement samples. While the rate of volatile materials in the molds is determined by this device, the volume and expansion status are also tested and a consistent and accurate result is obtained.

While the Le Chatelier Water Bath device is produced completely in accordance with all necessary standards, all the materials used for its production have been carefully used in order to ensure that the device is used in the most effective and most accurate way, and that it is very durable and long-lasting, and all of them are preferred as quality materials. .

This device reaches the boiling point in 30 minutes and thus offers a very practical and short-term test process. It provides this with the help of two separate heater units, and also has a timer to set the boiling point of cement and concrete samples. Thanks to the digital display, it allows the data to be read easily.

Water bath

Heated water is filled in the water bath used in the laboratories and the samples placed in it are cultured at a constant temperature. Thus, the water bath used in laboratories includes thawing, heating of the reagent site or incubation of cell cultures.

This device, which enables certain chemical reactions to take place at high temperatures, is among the most used products among asphalt testing devices.

What is the Working Principle of Water Bath?

The working principle of the water bath increases the temperature resistance of the transfer water thanks to the sensor in it and is compared by an integrated amplifier. Thus, asphalt components are detected using the heating method with these devices that provide control to the user.

Asphalt, which comes together from different materials, is separated into its components thanks to this experiment. At this point, the water bath to be used should be produced in accordance with the standards and at the same time, the amount of temperature resistance should be high.

At the same time, its external insulation is quite good, allowing for safe use and clear measurement.

This product, which has thermostatic temperature control, has a capacity of 14 liters, 30 liters and 48 liters, and at the same time, its inner chamber is completely made of stainless steel. In addition, since it has double-walled insulation, the fluctuation in the results and measurements is very low. Finally, thanks to the cover on it, it is among the products that provide occupational health and safety to a great extent.

Le Chatelier Water Bath Features

Le Chatelier Water Bath is a very functional device, and it is produced in an extremely durable way that meets all standards, especially with Argon Test quality. It has been specially designed for effective and practical use as well as determining the most accurate test results. Le Chatelier Water Bath features are as follows;

The inner surface of the Le Chatelier Water Bath is made of stainless steel.
The outer surface of Le Chatelier Water bath is electrostatic powder painted.
It has a digital display.
It has a shelf with a capacity of 12 molds and is sent to you with this shelf.
It has a weight of 20 kilograms.
Device power is 220 V, 50-60 Hz, 1 ph.
This device operates between ambient temperature and 95°C.

What Does a Le Chatelier Water Bath Do?

Le Chatelier Water Bath, as a device used to measure and determine the expansion and volume change of fly lime and ash used in concrete and cement, serves to determine the expansion and setting times of these samples.

While this device, in which testing processes are carried out by using Le Chatelier molds, is offered to you with the assurance and quality of Argon Test, Le Chatelier molds must be ordered separately.

How to Use Le Chatelier Water Bath

How to use Le Chatelier Water Bath? In response to your question; First, this device is connected to the power supply and then the water tank in this bath is filled up to the specified maximum level. After the water is filled, the cover on the device is closed and the temperature of the device is determined and adjusted.