To determine the “open-cup”, flash and fire points of oil products with a fl ash point above 80°C. Calibrated cup.

Gas or liquid gas lighting device above the cup.

550 W electric thermostatic heater.

Power supply: 220-240 V 1ph 50 Hz 550 W

Dimensions: 220 x 220 x 450 (h) mm.

Weight: 11 Kg.

Cleveland Open Cup Flash And Ignition Point Tester

The Cleveland Open Cup Flash And Flash Point Tester, as a device to detect the flash point of petroleum products, determines the flash point of these petroleum products above 80 degrees in an open vessel in a calibrated vessel with a gas or liquid gas flash unit.

While measuring the lowest temperature at which diesel fuel or kerosene can form flammable vapor by mixing with air, it determines the flash point of petroleum products by applying a test spark to the space above the sample liquid it heated. It does this with its 550 W electric thermostatic heater.

Cleveland Open Cup Flash And Ignition Point Tester Contents and Features

The content and features of the Cleveland Open Cup Flash and Fire Point Tester device, which is used to detect the flash points of petroleum products, are as follows;

Thanks to the built-in sample metering pump, it controls the correct flow.
Thanks to the mass flow controller, it controls the flow in the most accurate way.
It has the function of observing the flash point without the need to open the box with the camera with its built-in inspection facility.
Thanks to the spark electrode cleaning system, it makes the necessary maintenance on the system by exploding the accumulated electrodes without the need to regularly open the box.
Thanks to its internal recovery unit, it can provide a return against 5 barg back pressure.
Atmospheric pressure recovery and internal sample cooler are other components and features.