The device measures the volume loss of wear test samples.
It can be tested for abrasion with specimens written below:
Paving Stones – Concrete Slabs – Slate
Cast iron horizontal pan, 30 rpm, 750mm diameter, equipped with 200mm test track for positioning the sample.
Independent control panel with digital revolution counter that stops automatically after preset revolutions.
Power: 220V 50Hz
Weight : 250 kg
Böhme Abrasive Device (Vertical)
It is important how resistant natural stone and concrete products are to abrasion. For this reason, the abrasion effect on natural stones and concretes is started to be determined by using the böhme abrasion device. With the Böhme etching device, the wear resistances can be determined quickly. Considering the thickness of the wear disc, it is 70 MM. In addition, when we examine the number of revolutions, it is a device with a working performance of 75 revolutions per minute. While the device has a counter with digital operating capacity, the set automatically shuts down after rotation. Thus, the set does not require any manual intervention after the turn. While there is etching powder with the device, it is supplied together.
Böhme Abrasive Device Features
How to Use Böhme Abrasive Device?
You can use the Böhme abrasion device for abrasion control on both concrete products and natural stones. In order to be able to calculate the abrasiveness, the device is used together with the etching powder.