5 Ton capacity.
Machine is supplied complete with load cell.
Digital load cell indicator shows load and breaking load
Loading is made by using electric motor
Motor speed control using variable frequency drive
Comes withflexural device
220-240 V 1 ph 50 Hz.

The tile crushing device, which is used to break many materials with medium hardness or weak wear feature, is basically among the concrete testing products. The low compressive strength of the materials is achieved thanks to the power provided by this device.

Generally, tile stone is used for the crushed material, and adjusting the device according to the tile material gives the result. These products, which have a very simple use thanks to their structure that facilitates the crushing process, also do not cause any problems during performance thanks to their strong structure.

Tile Breaking Device Features

The tile breaking device, which has the capacity to lift 5 tons of load, is very functional and easy to use, especially since it is a new technology and is resistant to abrasion and impact.

Thanks to its structure that facilitates practical use in terms of design, it appears as very advantageous products.

The measurement of the tile breaking device is done as a load cell, and thanks to this feature, precise measurements are provided. In other words, these devices, which measure load cells up to 5 tons of capacity, reveal the most sensitive results.

Thus, it is very easy to collect the objective data obtained with the device, which reveals reliable test results, and at the same time, it is possible to use them for a long time thanks to the durable crushing apparatus.

Considering the other technical features of this product, it is also possible to set the device to be speed control. In other words, thanks to the operation control feature of these devices, it is possible to perform the operations at high speed and it is easier to obtain more performance.

Since the load indicator of the device used during the test phase is found digitally, it is possible to see the maximum breaking load on the screen and save it to the system.

The motion system of the device is provided by an electric motor and thanks to these motors with 220 to 240 v power, the device works at a speed of 1 ph 50 Hz.

Using the Tile Breaking Device

The use of the tile breaking device is very simple, and thanks to the presence of an electric motor, it is possible for even inexperienced operators to use the device. During the experiment, material is first fed to the machine from the top feed, and then the high-speed hammer that crushes the material performs the test.

The tile breaking device is produced in accordance with the EN 1340 standard, so it has the ability to respond to all conditions thanks to its performance. At this point, after the tiles to be broken are placed in the device, the speed selection is made and it is adjusted completely according to the size of the person himself.

The load indicator in the digital area enables the determination of the applied speed, thus making it easy to apply at the maximum level. Thus, it is possible to test how much pressure the tile products can withstand without breaking, and then the level of breakage that may occur due to any problems in the areas where these products will be used is determined.