Compression pipe testing machine was designed to conduct vertex compression testing with full load testing without impact or blows on tubes and preformed parts which are made of concrete, steel fibre concrete and reinforced concrete.

Test pipes with diameter 100 mm minimum – 1200mm maximum.

Load capacity is 500 kN.

Full auıomatic hydraulic unit.

Double pump system.

Adjustable load rate between 0.5 and 25 kN /s.

Accuracy is 0.5 % of indicated load.

Pressure transducer with accuracy 1% accuracy.

Comes with GLCD screen.

220- 240 V / 50 Hz.

Concrete pipe test press with 500 KN loading attendant consists of 3 parts. Concrete pipe test press, consisting of loading body, digital graphic reading display system and hydraulic power unit, are especially use test equipment for discharge and drainage pipes, peak pressure tests on fittings or discharge pipes for concrete pipes.

For pipes with a length of at least 100 mm and up to a maximum of 1200 mm, these products require highly functional uses.

Thanks to the fully automatic hydraulic unit, users are able to test easily, and the test process is achieved both in less labor and in a shorter time.

Concrete Pipe Test Press Features

As we mentioned above, the product features both a fully automatic hydraulic unit and a double-pump system, making it functional.

The hydraulic power unit of concrete pipe test press products can be adjusted automatically between 0.5 and 25 KN/S, in addition to very quiet results, and the loading weight has the loading owners with an accuracy of 0.5%.

Thanks to the fast loading pump and the safety valve, that is, the maximum pressure valve, which has overload protection features, it provides both ease and safety. It has a structure that provides these products with a hydraulic power unit, increasing safety and easy accessibility, and the power unit is located on the right side of the loading body.

These products, which are used for test pressure, are produced in order to calculate the compressive strength of the structural elements produced by using the full load test without impact on concrete ice and concrete, reinforced concrete with steel fiber concrete.

This product, which has an accuracy of 1% for pressure measurement, is also very simple to use since it is produced with an LCD control unit.

Concrete Pipe Test Press Usage

Concrete pipe test press is very simple to use and it is possible to operate both automatically and manually. It is possible to enter the electronic modules in the products as codes, and it is very easy to get graphic and data values according to the code entered before the process, to save the sample properties and to transmit the user information to the computer. Thus, it is easier for the person performing the test to access the data, and at the same time, it is possible to send the customer report directly to the printer.

By using the internal electronic modules of the pipe duration, it is possible to use the press actively without the need for a computer, and the calibration information is preserved in the electronic modules of the press.

For this reason, thanks to keeping these modules hidden, a computer is constantly needed, and at the same time, there is no need for people to recalibrate in case the computer breaks down or there is no use case.

Thus, there is no time for people to re-adjust the test device, thus saving time.