Bohme Abrasion Machine

The device measures the volume loss of wear test samples.

It can be tested for abrasion with specimens written below:

Paving Stones – Concrete Slabs – Slate

Cast iron horizontal pan, 30 rpm, 750mm diameter, equipped with 200mm test track for positioning the sample.

Independent control panel with digital revolution counter that stops automatically after preset revolutions.

Power: 220V 50Hz

Weight : 250 kg

Böhme Abrasive Device (Vertical)

It is important how resistant natural stone and concrete products are to abrasion. For this reason, the abrasion effect on natural stones and concretes is started to be determined by using the böhme abrasion device. With the Böhme etching device, the wear resistances can be determined quickly. Considering the thickness of the wear disc, it is 70 MM. In addition, when we examine the number of revolutions, it is a device with a working performance of 75 revolutions per minute. While the device has a counter with digital operating capacity, the set automatically shuts down after rotation. Thus, the set does not require any manual intervention after the turn. While there is etching powder with the device, it is supplied together.

Böhme Abrasive Device Features

When we start to examine the features of the Böhme etching device, we can say that it is designed in vertical standards. In addition, it is 85 KG in terms of weight. It has features in the form of 220 V 50-60 HZ 1ph. While natural stones are one of the important materials used for interior and exterior flooring, it should also be determined what kind of structure they have against wear. Because natural stones, which are used as coatings indoors and outdoors, are prevented from causing problems in terms of use by creating wear problems later on.

How to Use Böhme Abrasive Device?

You can use the Böhme abrasion device for abrasion control on both concrete products and natural stones. In order to be able to calculate the abrasiveness, the device is used together with the etching powder.