It performs fully automated testing procedures, including speed and software for certificate printing. The upper and lower platens are 165 mm in diameter.
vertical daylight
Vertical daylight between platens is 189 mm
Dual Load Chamber: 0 – 250 kN (for compression testing) 0 – 15 kN (for bending testing)
Low volume piston (15kN) per s for very accurate testing of low strength (compression and bending) samples.
Maximum piston stroke: approx. 35 mm CE Directive compliant safety guard with hinged polycarbonate. Two-column rigid frame mounted on a steel base.
Calibration and Accuracy: Class 1.0 The machine is equipped with a lower compression platen and attachments to easily secure the compression/bending unit.
Power supply: 220-240V 1ph 50z 750 W.
Dimensions: 395 x 385 x 1450 mm
Weight: 310 kg.
The cement compression bending test press, as a fully automatic device, provides consistent and reliable testing of compression and bending tests of prism molds, parts and mortar cubes.
It is meticulously produced by Argon Test in accordance with the CE norms required for operator health and safety, as well as ASTM, BS and EN standards. This device, which can be used easily and smoothly even by inexperienced operators, is fully automatic and has test report speed adjustment and software.
Cement pressing and bending apparatuses are products designed and produced in order to examine whether the beams meet all the necessary standards for use in buildings and to understand the standard conformity of these beams with reliable results.
All cement pressing and bending apparatuses produced by Argon Test in the highest quality and presented to you with the assurance of our company are used to examine the general quality of the beams.
While these apparatuses are produced in order to examine the resistance of the beams against pressure and how much pressure they show, the required beam durability examinations are revealed with very reliable and consistent results in a very rapid manner.
With a loaded test system, the durability of the beams in the final state of the building during the bending phase can also be determined by this apparatus. These apparatuses, which are used to test the bending and compressive strength of beam samples, are offered to you by Argon Test for three different sizes.
Cement Compression Flexural Test Press Parts
This device contains many parts and is produced by Argon Test in the most perfect way for the most reliable and consistent results. The parts included in this device are as follows;
Automatic Hydraulic Power Unit
Two-column Loading Body
Digital Data Acquisition and Control System
Moving Head Top Plate and standard Bottom Plate
Maximum Pressure Valves
Limit Switch
Software
Ethernet Cable.
Cement Compression Flexural Test Press Features
Cement compression bending test press features are very curious. First of all, the upper and lower plate compression diameter of this test device is 165 mm, and the vertical clearance between the plates is 189 mm. This device, which has a double-loaded frame, is double-loaded for bending tests between 0-15 kN and for compression tests between 0-250 kN.
The maximum piston movement of this device, which enables samples with a strength of 15 kN and below to be tested in the most accurate way thanks to its low-capacity piston, is 35 mm. The protection cover is made of fiberglass, and two columns are placed in this device with a steel base.
The cement compression bending test press, produced with the highest level of calibration, is presented to you with bending and compression apparatus placed on the lower and upper compression plates. The power of this device, measuring 395x385x1450 mm and weighing approximately 310 Kg, is 220-240V 1ph 50z 750W.
How to Use the Cement Compression Flexural Test Press?
Since it is extremely easy to use, it can be easily managed even by inexperienced operators, and this device can handle all necessary operations on its own, especially since it is fully automatic. Having an extremely simple use, it performs the testing process with the following stages;
The test parameters, including the speed ratio, must be adjusted.
The compression or bending body must be selected using the valve.
In order to call the calibration values of the required load cell, the capacity of the body must be selected.
The load cell should be taken to the compression or bending part of the body with the switch, either up or down.
After all these operations, the operation command should be given by pressing the “Start” button on the control unit.
After the device is started, it performs the entire test process fully automatically, and when the sample is broken, it automatically stops and ends the process.
It then automatically saves the results of this test to its system or to a computer.
What are the Usage Areas of Cement Pressing and Bending Apparatus?
Cement pressing and bending devices do not measure only from a single angle and in a single matter, thanks to these apparatus, it is possible to examine the durability of concrete or cement beams in many respects.
Cement pressing and bending apparatus is a very effective system for examining the bending capacity of concrete beams, as well as examining how much pressure it can withstand. Finally, thanks to these apparatus, the stance of the cement beams against vibration can also be examined.
Thanks to these apparatuses, the most appropriate examinations to the current standards can be easily carried out. Thanks to Argon Test, you can have the best quality cement testing equipment and apparatus at the most affordable prices, and you can contact our company at any time for detailed information.
Sample Dimensions for Cement Compression and Bending Apparatus
These apparatuses, which are produced in order to test the compressive and bending strengths of the beam samples and to make the necessary examinations, are produced in accordance with various beam sample sizes. The sample dimensions for which the cement pressing and bending apparatus are suitable are as follows;
- 40x40x40 mm ölçüsünde küp numuneler için uygundur.
- 40x40x 160 mm ölçüsünde kiriş numuneleri için uygundur.
- 50x50x50 mm ölçüsünde küp numuneler için uygundur.
Tüm bu çimento kiriş ölçüleri için uygun olarak üretilen basma ve eğilme aparatı, bu sayede tüm bu ölçülerin en tutarlı ve güvenilir şekilde testten geçirilebilmesini sağlamaktadır. Bu ölçülerdeki numunelerin ülkemiz standartlarına uygunluğu bu aparatlar sayesinde en doğru sonuçlarla incelenebilmektedir.
Reviews
There are no reviews yet.