This mixer is designed for mixing mortar and grout, mainly in compliance with standard requirements. The paddle has planetary motion and is driven by a motor with a microprocessor-based speed and program controller. The blender can be operated in automatic or manual mode.

When the blender is used in manual mode, the two blending speeds can be changed via the rocker switch without turning off the motor. In automatic mode, any preset mixing program can be selected. The mixing head rotates at 62 and 125 r.p.m. and mixers 140 and 285 r.p.m. The automatic sand dispenser is supplied with the machine and the sand is automatically discharged into the mixing bowl thirty seconds after the start of the mixing sequence.

The mixer comes with a 5 liter capacity bowl and whisk.

220 volts, 50-60 Hz

Dimensions: 300x555x610 mm

Weight: 56 kg

Power: 250 watts

It is very easy to produce and homogenize the mortar mixture with the automatic programmable cement mixer in accordance with the determined international standards. In particular, obtaining a homogeneous mixture is very important for the durability of the structure in which this cement material will be used later, and for the tests to be performed before that to give accurate results.

Generally, when mass and more comprehensive cement mortar needs to be created, the mixture to be used in the tests is created with an automatic programmable cement mixer, so that the tests of the obtained cement mortar can be done more easily.

This device also has a manual option, and it is important to use the automatic system in order to be able to switch to more rapid and faster testers. Thanks to the automatic programmable cement mixer with a 5 lt capacity, consistency tests and durability tests can be performed on the test components of the mixed cement without any problems.

What are the Technical Specifications of Automatic Programmable Cement Mixer?

In particular, the materials used in the construction of buildings must be produced in accordance with the standards and must be tested in accordance with the standards. However, since the devices used must be produced in accordance with international standards in order for all of these to be in question, the automatic programmable cement mixer is in accordance with EN 196-1, EN 196-3, EN 413-2 and EN 459-2 standards in terms of technical features and applicable standards. produced.

These devices, which have a size of 300x555x610 mm and a weight of 56 kg, also work at 250 W power, ensuring that the mortar is homogenized. This product, which should be used steadily due to being a very heavy device, also carries out all operations automatically without the need for any data entry during mixing.

This device, which has a microprocessor system, has a very long life and reveals the required capacity details without any problems.

If the product is loaded above its capacity, it is necessary to put an appropriate amount of load in accordance with its use, since both the processor and the circulation apparatus may deteriorate.

Thanks to its automatic programmable system, it is possible to perform fast or slow circulation well, and the circulations can be carried out only by selection thanks to the automatic program completely included in it.

However, our program should be chosen by taking into account the rotation factor that will occur in a minute, and if the right speed is not selected, it is not possible to achieve the targeted result.

When using this device, which provides 125 turns in fast speed and 62 turns in slow speed, rotation selection and speed adjustment must be made by considering the properties of the mixture in it.

In other words, in this context, it is very important to determine for which cycle the content of the mixture is suitable, and it is not possible to achieve the targeted result when it is operated at the wrong cycle.