The rolling thin film oven is used to measure the effect of heat and air on a moving film of semi-solid asphaltic material. The results of this treatment are determined from measurements of the asphalt properties before and after the test.
Internal chamber is stainless steel, provided of large glass door for inspection.
Comes with 8 pcs of glass container.
Dimensions: 730 x 750 x 630 mm.
Power supply: 220 V 50 Hz.
Weight: 96 kg.
Rolling Thin – Film Oven
Rolling Thin – Film Oven is a device that performs tests in the field of physical properties within the rolling thin film furnace asphalt testing equipment. Asphalt binder is tested by exposure to high temperatures during manufacture and placement.
The samples are taken into cylindrical glass bottles and placed in the oven, and the samples are waited for 85 minutes at a temperature of 63%. Samples taken from the furnace are then stored specifically for physical testing.
Rolling Thin – What Does Film Oven Do?
What does Rolling Thin – Film Oven do? In fact, testing the binding of asphalt used on roads at high temperatures forms the basis of these devices. It makes the intervention easier when it is necessary to determine the rutting resistance of the asphalt applied on the roads, especially when it is necessary to make it more resistant.
All samples are expected to cool for 60 to 180 minutes for this test process, which takes approximately 3 hours. After the cooling process is completed, the mass difference between the two measurements is determined and their weights are recorded in laboratory environments.
Rolling Thin – Film Oven Intended Use
The purpose of use of these products is to measure the effect on the semi-solid whole with the heat and air inside the thin film furnaces operating on the rotation principle. Thus, asphalt measurements are made before and after, and robustness and usability are tested at this rate.
Its large inner chamber is also made of stainless steel and can be used up to 8 glass bottles.
Reviews
There are no reviews yet.