Used to determine the consistency of fresh mortar, lime and masonry cement. This apparatus consists in a base, a vertical support, a graduated rod with 25 mm dia. plunger, a test cup dia.

80 mm x 70 mm deep and a 40 mm dia. tamper. Drop height 100 mm.

Dimensions: 260 x 250 x 450 mm.

Weight: 5 kg

The cement penetrometer, which is used to determine the general consistency of the cement mortar, is of great importance. Tests to be made with this device are also very important since the consistency of the structures must be in accordance with the determined standards and the durability of the structures completely depends on the consistency of the cement.

Since the consistency is the determining factor in terms of durability, strength against pressure or air permeability, it is necessary to consider whether products with the required consistency are produced.

Generally, within the scope of the tests carried out by these devices, it is determined whether the cement that will be used in the buildings later on has the required properties, and products that do not comply with the determined specifications are reconstructed. Otherwise, the use of products that come out of tests using devices that give wrong results, or products that are used without testing, inside the building reduces the durability of the building to a minimum.

In this way, it is very important that the devices to be used are produced in accordance with the determined world standards and that the margin of error is at a minimum level or even not at all, giving the closest result to the truth.

Cement penetrometer is produced in accordance with EN 413-2, EN 459-2 and EN 1015 Standards, and it is possible for the tests carried out with these devices to give the most accurate results. Since the device has an automatic measurement system during the consistency determination phase performed with this device, there is no need for the person making the measurement to enter data manually or to take any extra action.

There is a vertical system in the lower part of the product, that is, in the bottom part, and this system ensures that the measurement is made easier and that the measurement is carried out in accordance with international standards without deviation.

What are the Penetrome Technical Operational Features?

Operations must be carried out according to the working principles of cement penetrome, and if these principles are not taken into account, the data received will be wrong. Systematically, the measurement steps have to be carried out at constant temperature, constant load and constant time, and it is not possible to reach real data if any or none of these constant conditions are met.

This device pierces the mortar with the needle in it and thus gives information about its consistency. The information about the consistency differs according to the entry and exit speed and depth of the needle into the mixture, and the degree of consistency according to the main standards is indicated on the device.

There is an accessory that helps to adjust the height of the carrying handle of the product, so that the height is determined according to fine or coarse samples and the process is carried out more accurately. This arm, which is one of the manual evenings in the device, is determined by the person and ensures that the process is carried out.

The digital indicator of the device allows you to see the results instantly and reflects the results of the system to the digital screen within a few minutes. Thus, information about the number of minutes measured, timing, result and needle penetration speed, as well as the data obtained are available on the digital display.