Falling Weight Impact Tester

25X25 mm size wood + profile body guiding profile.Scaling is scaled with polystyrene and aluminum.10 mm diameter and 40 mm long as weight falling piston.50 HRC hardness of 12.7 mm diameter drill bit Height of drop: 200 mm – 2000 mm controllable.200 mm – 500 mm; 50 mm accuracy.
500 mm to 100 mm to 1000 mm precision. Concrete plate : 50x400x400 mm.
Dimensions : 450x600x2550 mm.
Weight (app.) : 70 kg.

The impact strength tester is among the test devices used to measure the durability of the membrane to be treated during the insulation process and to obtain information about its durability.

It is very important that the materials to be used in construction areas show durability, and it is possible to get an idea about whether these materials are in accordance with the standards and whether they are durable or not by using an impact resistance tester.

In particular, the test device is very easy to use, and the impact strength tester is used in order to avoid any problems in the field of use and to access all information about the materials to be used in a clear and understandable way.

At this point, it can be used not only on membrane products, but also on various coating products such as concrete blocks used in the construction field, and it allows to determine the durability of these products. Thus, it is possible to design buildings that are built in accordance with international standards and that are durable and long-lasting, which will not cause any problems in the future.

What are the Technical Specifications of Impact Strength Tester?

During the use of the impact strength tester, its technical features are very important, and the process is carried out according to these technical features. Thanks to the vertical force applied on the sample material, the changes in the physical and chemical structure that will occur in this material are analyzed, and it also determines whether these products to be used in the building are resistant to impact and facilitates the selection of durable products.

The distance between the load on the sample and the loading disc has been determined as 40 mm load rating and there is a standard range.

Additional materials included in the device include a drilling ball and a loading bar. The drilling ball found here is 10 mm and has a hardness of 50 HRC.

This device, which is approximately 50 kg, is produced using polystyrene material, and concrete materials of different structures provide different strengths.

Two different choices are made between the impact strength tester, which has a clear and understandable test system, and method a or method b only within the scope of the main test sample. Concrete slabs with dimensions of 50 x 500 x 500 mm are used for method a, while concrete slabs with dimensions of 30 x 300 x 300 mm are used for method b.

The general dimensions of the impact strength tester are produced as 700 x 700 x 550 mm. At the same time, the approximate weight of this device is measured as 50 kg.

Thus, the force test performed with the impact strength tester, to determine both the durability of the materials and whether they are suitable for the area of ​​use, presents the best result to the person who performs the experiment with the minimum margin of error. Thanks to its clear and understandable system, it can be used by inexperienced operators.