Used to determine bitumen ductility. The elongation of briquet mould is contolled under special conditions. Ductulity device has a moveable sliding rod on a guide line, driver motor, plunging type heater with digital thermostat, cooling unit and a big tank where the pump is placed.

It works automatically with a velocity of 50 mm/min and has maximum stroke of 1500 mm.

Tank and external frame are insulated with stainless steel and glass fiber. Temperature of water bath is hold constant at 25 °C ± 0,5 °C . Max. Tensile force is 300 N and accuracy± 0.1 N. Ductility device can take 3 briquet moulds simultaneously.

TECHNICAL SPECIFICATIONS

Electrical supply 220 V, 1ph, 50 Hz.

Loading speed 50 mm/min.

Max. Stroke 1500 mm.

Temperature 25 °C ± 0,5 °C.

Pulling force 300 N ± 0.1 N.

Size 2140 x 350 x 750 mm.

Weigt 130 kg.

Ductility Tester

Ductility Tester, which includes 5 different systems: movable slider, slider motor, cooling unit, pump tank, digital thermostat and immersion heater, is a device used for the determination of bituminous ductility.

Working at a speed of 50 mm per minute and with a maximum stroke length of 1500 mm, this device has fiberglass insulation and is manufactured using stainless steel both in its tank and around its outer circumference. The Ductility Tester, which has a capacity where 3 briquette mold samples can be placed at the same time, keeps the water temperature in the inner bath constant at 25 °C ± 0.5 °C thanks to its digital thermostat and immersion heater system.

This device, which has a maximum pulling capacity of 300 N and a pulling sensitivity of ± 0.1 N, works with 220 V, 1ph, 50 Hz electrical connection. The size of the device is 2140 x 350 x 750 mm. As a large device, it has a weight of 130 kilograms due to the fact that it contains many systems.

What Is Ductility Tester Used For?

Ductility Tester is a device used to determine the maximum elongation limit of these bitumen samples by keeping the bitumen samples in the ductility briquette molds under constant temperature and rotating them at a constant speed. It is based on the system of controlling the elongation threshold of the briquette mold, which contains a molten bitumen sample under conditional conditions.